Water bottle filling machine

This unlocked Water Bottle Filling Machine features three main sections that are located on a common base. The central platform of this system is made of mild steel or clayed version of stainless steel. This equipment is connected with in feed air blow tunnel and this tunnel is attached to air blower. This air blower and air pressure flow regulating valve are located on the top most part of the tunnel. The air blower uses air filter for suctioning of air.

This tunnel is used for transferring bottle to the in feed neck guide plate of rinsing section via air pressure.

Bottle Rinse: Bottle neck holder bracket assembly that act like two pairs of fingers are use to grasp bottles transferred in feed neck guide plate. Guide bars of this machine will turn the gripped bottle in upside down position by maintaining 180 degree angle. The inverted bottles will be filled with water by rinsing nozzles located on rear section of this system. Rinsing of bottle is executed under 90-270 degree rotation and in zero degree position. The machine will cease its washing cycle after 180 degree rotation. After that, the bottles will be inverted again and will be conveyed to the out feed neck guide plate. From there, these bottles will be sent towards the filler.

Bottle Filler/Caper

For holding bottle, filler neck holder used external guide. Filling valve of this machine is instrumental in filling and sealing of bottles depending on its rotational speed.

Liquid probe of its filling tank is used to regulate level of filled mineral water. Valve of this machine closes when the bottle is full. After closing of this valve, bottle is lowered to convey towards the neck guide plate.

Caps are applied on bottle when it enters into capping turret. Chucks are adjusted prior to applying caps.

Properly capped bottle is delivered towards the conveyor.

Drive section of this machine comprises of gear trains, gearbox and motor. A/C drive of this machine plays significant role in managing operating speed of this machine.

Out feed and in feed of its neck holding part can be changed as per application needs. The cap elevator is used to feed cap to the chute. Transparent sheet is used to cover its stainless steel frame housing. Offered equipment is perfect for filling 330 mm high and 100 mm size bottle. We also offer this system as per tailor made specifications.